Best 7 Pastry For Single Crust Pie Recipes

BUTTER PASTRY FOR SINGLE CRUST 9-INCH PIE

Steps:

• Butter should be cut into ½ - inch cubes and frozen.
• Combine flour and salt in food processor with knife blade attachment and process for about 8 to 10 seconds.
• Add cold butter cubes and process by pulsing approximately 8 to 10 times or until mixture resembles coarse crumbs. Do not over mix.
• Add water through food chute with processor running. Add only enough water to moisten so dough begins to clump. Do not allow the dough to gather into a single mass.
• Form into a 4-5 inch disk, wrap in plastic wrap and refrigerate for 30 minutes before rolling. This will make the dough more elastic and easier to handle. (Dough will keep several days in the refrigerator and several months in the freezer, but will need to be tempered before rolling.)
• Roll out dough on a lightly floured surface, into a 12” round; fit pastry into a 9-inch pie pan. Trim away excess allowing ½ to ¾- inch over hang. Fold dough edge under and crimp or flute. For best results freeze crust before filling or baking.
• Bake or fill according to recipe directions.
• Preheat oven to 450°F
• Prick the bottom and sides of the pastry generously with a fork - particularly where the bottom and sides meet. (If using a pan with removable bottom, do not prick holes in the pastry; instead, fit a piece of foil onto the unbaked pastry and fill with pastry weight or dried beans.)
• Bake 10 to 12 minutes or until golden brown.

PASTRY FOR SINGLE-CRUST PIE

Steps:

• In a large bowl, combine flour and salt; cut in shortening until crumbly. Gradually add water, tossing with a fork until a ball forms. Roll out pastry to fit a 9-in. or 10-in. pie plate. , Transfer crust to pie plate. Trim crust to 1/2 in. beyond rim of pie plate; flute edge. Fill or bake crust according to recipe directions.

CLASSIC BUTTER PIE PASTRY

Steps:

• Combine flour and salt; cut in butter until crumbly. Gradually add ice water, tossing with a fork until dough holds together when pressed., Shape dough into a disk for a single-crust pie; for a double-crust pie, divide dough in 2 with 1 piece slightly larger than the other. Shape into 2 disks. Wrap and refrigerate 1 hour or overnight., On a lightly floured surface, roll 1 disk of dough to a 1/8-in.-thick circle; transfer to a 9-in. pie plate. , For a single-crust pie: Trim crust to 1/2 in. beyond rim of plate; flute edge. Fill or bake according to recipe directions., For a double-crust pie: Add filling to pie. Roll remaining dough to a 1/8-in.-thick circle. Place over filling. Trim, seal and flute edge. Cut slits in top. Bake according to recipe directions.

PASTRY FOR SINGLE-CRUST PIE

Steps:

• In a bowl, combine flour and salt; cut in shortening until crumbly. Gradually add water, tossing with a fork until dough forms a ball. Roll out to fit a 9-in. or 10-in pie plate. Transfer pastry to pie plate. Trim pastry to 1/2 in. beyond the edge of plate; flute edges. Fill or bake shell according to recipe directions.n

PASTRY FOR PIES AND TARTS

Steps:

• One-Crust Pastry: In medium bowl, mix flour and salt. Cut in shortening, using pastry blender or fork, until mixture forms coarse crumbs the size of small peas. Sprinkle with water, 1 tablespoon at a time, tossing with fork until all flour is moistened and pastry almost leaves side of bowl (1 to 2 teaspoons more water can be added if necessary). Gather pastry into a ball. Shape into flattened round on lightly floured surface. Wrap flattened round in plastic wrap and refrigerate 45 minutes or until dough is firm and cold, yet pliable. This allows the shortening to become slightly firm, which helps make the baked pastry flaky. If refrigerated longer, let pastry soften slightly at room temperature before rolling. Using floured rolling pin, roll pastry on lightly floured surface (or pastry board with floured pastry cloth) into round 2 inches larger than upside-down 9-inch glass pie plate or 3 inches larger than 10- or 11-inch tart pan. Fold pastry into fourths and place in pie plate or tart pan, or roll pastry loosely around rolling pin and transfer to pie plate or tart pan. Unfold or unroll pastry and ease into plate or pan, pressing firmly against bottom and side and being careful not to stretch pastry, which will cause it to shrink when baked. For pie, trim overhanging edge of pastry 1 inch from rim of pie plate. Fold edge under to form standing rim; flute edges (see Decorative Crust Ideas, page 00). For tart, trim overhanging edge of pastry even with top of tart pan. Fill and bake as directed in pie or tart recipe.
• Two-Crust Pastry: In medium bowl, mix flour and salt. Cut in shortening, using pastry blender or fork, until mixture forms coarse crumbs the size of small peas. Sprinkle with water, 1 tablespoon at a time, tossing with fork until all flour is moistened and pastry almost leaves side of bowl (1 to 2 teaspoons more water can be added if necessary). Gather pastry into a ball. Divide pastry in half and shape into 2 rounds on lightly floured surface. Wrap flattened rounds in plastic wrap and refrigerate 45 minutes or until dough is firm and cold, yet pliable. This allows the shortening to become slightly firm, which helps make the baked pastry flaky. If refrigerated longer, let pastry soften slightly at room temperature before rolling. Using floured rolling pin, roll one round of pastry on lightly floured surface (or pastry board with floured pastry cloth) into round 2 inches larger than upside-down 9-inch glass pie plate. Fold pastry into fourths and place in pie plate, or roll pastry loosely around rolling pin and transfer to pie plate. Unfold or unroll pastry and ease into plate, pressing firmly against bottom and side and being careful not to stretch pastry, which will cause it to shrink when baked. Spoon desired filling into bottom crust. Trim overhanging edge of bottom crust 1/2 inch from rim of plate. Roll out second pastry round. Fold into fourths and place over filling, or roll loosely around rolling pin and place over filling. Unfold or unroll pastry over filling. Cut slits in pastry so steam can escape. Trim overhanging edge of top pastry 1 inch from rim of plate. Fold edge of top crust under bottom crust, forming a stand-up rim of pastry that is even thickness on edge of pie plate, pressing on rim to seal; flute edges (see Decorative Crust Ideas, page 00). Bake as directed in pie recipe.

CLASSIC CRISCO SINGLE CRUST

Steps:

• Spoon flour into measuring cup and level.
• Combine flour and salt in medium bowl.
• Cut in shortening using pastry blender or 2 knives until all flour is blended to form pea-size chunks.
• Sprinkle with water, 1 tablespoon at a time.
• Toss lightly with fork until dough forms a ball.
• Press dough between hands to form 5- to 6-inch"pancake".
• Flour rolling surface and rolling pin lightly Roll dough into circle.
• Trim circle 1 inch larger than upside-down pie plate.
• Carefully remove trimmed dough.
• Set aside to reroll and use for pastry cutout garnish, if desired.
• Fold dough into quarters.
• Unfold and press into pie plate.
• Fold edge under.
• Flute.
• For recipes using a baked pie crust, heat oven to 425°F.
• Prick bottom and side thoroughly with fork (50 times) to prevent shrinkage.
• Bake at 425°F for 10 to 15 minutes or until lightly browned.
• For recipes using an unbaked pie crust, follow directions given for that recipe.

SINGLE-CRUST SWEET PASTRY PIE SHELL

Steps:

• In bowl,mix together flour,sugar and salt.Using a pastry blender cut in the butter until the consistency resembles fine crumbs with a few larger pieces.
• In liquid measure,beat egg yolk with ice-water;drizzle over dry ingredients,stirring briskly with fork to form ragged dough.Press into disc shape.Wrap in plastic wrap;refrigerate until chilled;about 30 minutes.
• On lightly floured surface,roll out pastry to generous 1/8-inch thickness;fit into 9-inch pie plate.Trim edge to 3/4-inch overhang;fold overhang under and flute edge.
• Bake at 375°F for 12 to 15 minutes minutes or until golden brown.