Best 7 Homemade Red Pasta Dough Recipes

HOMEMADE RED PASTA DOUGH

Steps:

• Place flour on a marble or wooden work surface. Make a well in the center and crack in eggs; add salt and tomato paste. Gently beat eggs with a fork, incorporating the surrounding flour, until batter is runny. Bring remaining flour into the batter using a bench scraper until dough forms a ball. Mix in water, 1 tablespoon at a time, if dough feels too stiff.
• Knead dough with your hands by flattening the ball, stretching it, and folding the top towards the center. Turn 45 degrees and repeat until dough is soft and smooth, about 10 minutes.
• Shape dough into a ball. Place in a bowl and cover with plastic wrap. Refrigerate until firm, 30 minutes to 1 hour.
• Roll dough out using a pasta machine or rolling pin and turn into your favorite pasta shape.

HOMEMADE PASTA DOUGH

Steps:

• In a small bowl, whisk the first 6 ingredients. On a clean work surface, mix the all-purpose and semolina flours, forming a mound. Make a large well in the center. Pour egg mixture into the well. Using a fork or fingers, gradually mix flour mixture into egg mixture, forming a soft dough (the dough will be slightly sticky)., Lightly dust work surface with flour; knead dough gently 5 times. Divide into 6 portions; cover and let rest 30 minutes., To make fettuccine, roll each ball into a 10x8-in. rectangle, dusting lightly with flour. Roll up jelly-roll style. Cut into 1/4-in.-wide strips. Cook in boiling water 1-3 minutes.

HOMEMADE PASTA DOUGH

Steps:

• Place flour in a mound on clean large work surface. Make a well (hole) in center of flour. Crack eggs into center of well. Sprinkle salt over eggs.
• Using fork, gently break up eggs. With fork, begin to incorporate flour into eggs. Once mixture is somewhat combined, use hands to squeeze and work dough into a ball. (Dough should be tacky but not sticky.)
• Knead pasta dough like bread dough-push down dough with palm of hand, fold dough over itself and repeat-until dough is smooth, about 8 to 10 minutes.
• Cover dough with clean kitchen towel. Let rest about 30 minutes.
• Cut dough into 4 equal pieces. Remove 1 piece of dough; cover remaining with towel. Flatten piece of dough with palm of hand. Using rolling pin or pasta machine, roll to about 1/16-inch thickness or to desired thickness. Repeat with remaining pieces of dough.

EASY HOMEMADE PASTA DOUGH

Steps:

• Beat flour, eggs, olive oil, and salt together in a bowl. Add water, 1 teaspoon at a time, to flour mixture until a smooth and very thick dough forms.
• Turn dough out onto a work surface and knead for 10 minutes. Let dough rest for 5 to 10 minutes. Divide dough into 8 balls and use a pasta machine to roll and cut dough into desired pasta shape.

FRESH RED-PEPPER PASTA DOUGH VARIATION

Steps:

• Preheat oven to 450 degrees. Rub 1 large red bell pepper (about 10 ounces) with 1/2 teaspoon olive oil, and place on a baking sheet. Cook, flipping after 10 minutes, until skin begins to bubble and is lightly brown in spots, about 25 minutes. Transfer to a bowl, and immediately cover with plastic wrap. Set aside to steam 15 minutes. Remove skin, stem, seeds, and ribs, and discard. Puree pepper in a food processor (you should have about 1/2 cup puree).
• Add eggs and yolk to puree in food processor, and process until combined. Add flour and 1 heaping teaspoon salt, and process until dough just comes together, about 20 seconds.
• Transfer dough to a well-floured surface. Knead until smooth and elastic, 5 to 10 minutes, adding up to 2 tablespoons flour if dough is too sticky. Place on a piece of parchment, and cover with an inverted bowl, or wrap tightly in plastic; let rest for 1 to 2 hours.
• Cut dough into 8 pieces. Working with 1 piece at a time (keep the remaining pieces covered with the inverted bowl), flatten dough into an oblong shape slightly thinner than the pasta machine's widest setting (number 1). Dust dough very lightly with flour, and feed through machine. Fold lengthwise into thirds and rotate 90 degrees. Repeat twice on same setting to smooth dough and increase its elasticity.
• Turn the dial to next narrower setting. Pass dough through twice, gently supporting it with your palm. Continue to press dough, passing it through ever-finer settings, two passes on each setting, until sheet is almost translucent and very thin but still intact (number 5 of 8 on a KitchenAid pasta roller). The dough will stretch to about 16 inches long. If dough bubbles or tears, pass it through again, and dust with flour if the dough is sticking.
• For farfalle, lasagna squares, or ravioli: Place rolled sheet on a lightly floured surface, and cut out as directed in corresponding recipe, using a dry brush to dust flour off if needed. For ribbon pastas: Place dough on a drying rack until slightly tacky, 10 to 15 minutes, and then use a pasta machine or cutting attachment to cut into strands. Drape over rack until strands are semidry and won't stick together, about 20 minutes. Cook immediately, or lay flat on a baking sheet dusted with semolina, cover tightly with plastic wrap, and refrigerate overnight.

BASIC PASTA DOUGH

Steps:

• On a clean dry work surface, make a mound of the flour and, using your fingers, make a well in the center of the mound. Using a fork, break the shell of the eggs one by one and drop the eggs into the center of the well you made of the flour. With the fork, beat the eggs together. Again using the fork, slowly begin to fold the flour in towards the center of the well to incorporate the flour into the beaten eggs. As you mix the flour with the beaten eggs, it will begin to form a doughy mass. Work this mass using your fingers until it begins to lose its moist and sticky character.
• When the mass begins to feel uniformly dry, begin to work the dough using both hands: kneading with the palms of both hands, pushing from the center of the ball of dough outwards and folding the near edge inwards to begin the kneading cycle again. The kneading stage should take about 10 minutes by hand.
• After the dough has been fully kneaded, it is time to thin the dough into sheets suitable for cutting. A manual pasta machine works wonders at this stage. Cut the ball of dough into three equal pieces. Form these pieces, by hand, into equal rectangular shape to be passed through the rollers of the pasta machine. Set the cylindrical rollers at their widest opening, put a piece of dough in the space between rollers and crank the handle to pass the dough through. As the sheet of pasta comes out the bottom of the rollers it should be set on a dry cotton towel to rest while you begin on the next piece. Repeat the thinning process with the remaining pieces of pasta, thinning and then setting aside, consecutively so that each piece of pasta is equally rolled out. When all the pasta has passed through the first rolling stage, set the machine to the next setting to begin rolling the pasta thinner. Start the rolling process again, beginning with the first piece of dough and continue with the remaining pieces. As each is rolled thinner set it aside and continue onto the next.
• As you return to the first piece of dough, set the cylinders one setting closer. Continue in this fashion until the pasta dough has been rolled out as thinly as possible.
• As the sheets of dough rest, keep them on a cotton towel, to prevent sticking to the work surface. When they are all rolled out you are ready to cut the pasta into the desired shape. They can be cut using the cutting wheels of the rolling machine or by hand using a knife.

PASTA DOUGH #1

Steps:

• In a large glass or plastic bowl combine 1 cup flour and remaining ingredients.
• With a mixer on low speed beat 2 minutes, scraping the bowl.
• You can do this part by hand.
• With a wooden spoon stir in enough additional flour to make a soft dough.
• Turn dough onto a lightly floured surface, knead until smooth and elastic, about 10 minutes.
• cover dough and let rest 30 minutes.
• Follow pasta machine instructions at this point, or lightly flour your counter and rolling pin, cut dough down to manageable size and roll, turn, roll, turn until desired thickness.
• Cut to desired shape.